Setting Up RAS Support Properties

You are prompted to restart the computer.

6.Continue as follows:

If the system is a basic Windows NT system, without the Windows NT Service Pack installed, click Yes to restart the computer.

If the Windows NT Service Pack is installed, click No. Then reinstall the Service Pack. (Service Pack 3 or higher is recommended.) Restart the system when prompted after you complete the Service Pack installation.

Setting Up Filters for Incoming Calls

Specify incoming call numbers to be accepted by the ISDN RAS Support driver by using the Calling number filtering list on the RAS Support Incoming Filter dialog box. Call filtering criteria applies to all ISDN RAS ports on the board.

NOTE

To direct incoming calls to specific ports, use the Call Setup dialog box. The Call Setup dialog box enables you to direct calls to specific ISDN and digital modem RAS ports, as well as Serial driver COM ports. The Call Setup button on the Incoming Filter dialog box opens the Call Setup dialog box. For additional information, see Setting Up Call Properties on page 101.

To access the ISDN RAS Support Incoming Filter dialog box, do the following:

98

Interphase Corporation