![](/images/backgrounds/146446/146446-244127x1.png)
Chapter 6: Setting Up Calls
NOTE
Make sure that each channel type selected for each digital modem port is also selected for the DM Support service. Otherwise, calls of that type will be rejected for the port. Filtering is first applied at the DM Support Service level. If this filtering is accepted, then filtering is applied at the digital modem port levels.
After changing call setup properties, save and activate settings as described in the next section, Saving Call Setup Properties.
Saving Call Setup Properties
After you finish setting up call properties, use either of the following options to save your changes:
•Click Apply to save the information for the next session without closing the dialog box, so that you can make other changes as required.
•Click OK to save information and close the Call Setup dialog box. You will see saved information after you reopen the Call Setup dialog box.
NOTE
To activate new call settings, you must click OK and restart your computer.
5536 PRI RAS Communications Controller Users Guide | 107 |