![](/images/backgrounds/146446/146446-24487x1.png)
Chapter 4: Installing the Software
NOTE
If the driver software is only partially installed, the driver will not appear in the Network Adapters list. To remove the driver(s) in the case of a partial installation, use the Add/Remove Programs function in the Windows NT Control Panel.
4.Click Yes to continue the driver removal.
–If a remaining RAS support driver is still installed in the system, the Network Adapters dialog box reappears. If you need to remove the remaining driver, return to step 3. If you do not, click Close.
–If you are removing the last (or only) installed RAS support driver, the Interphase 553X Base Driver dialog box appears. Go to step 5.
5.The Interphase 553X Base Driver dialog box identifies the install path that will be deleted, and asks if you are sure you want to deinstall the software:
FigureTo remove the remaining software:
5536 PRI RAS Communications Controller Users Guide | 67 |