Printer Drivers
Back
IndexContents Next 117
Choosing Glossy or Matte
1. On the Print dialog box (see page 113) select
the Printer Options panel (see page 116).
2. Select the XtraLife menu.
3. Select an option:
✔Glossy – invokes the "gloss" ICM profile in
the print job
✔Matte – invokes the "matte" ICM profile in
the print job
Cutting Prints
WARNING:
The cutter is very sharp and can cause
injury. Stay away from the cutter when the
printer is running.
1. On the Print dialog box (see page 113) select
the Printer Options panel (see page 116).
2. Click the Cutter pull-down menu.
3. Select an option (see page 31).
4. Click Print.
NOTE: The default setting (as shipped) is 1 cut
(separate prints).