Kodak ML-500 manual Calibration Process, Closing the Calibration Application, Process Overview

Calibration

Closing the Calibration Application

✔Click the at the upper right of the Configuration screen.

IMPORTANT: If you select Exit from the File menu, all ML-500 applications close.

Calibration Process

Process Overview

1.Print a calibration target (see page 79).

2.Analyze a calibration target (see page 80).

3.Send the LUT to the printer (see page 83).

You can perform the steps separately, as listed above, or perform all steps at one time by performing a complete calibration analysis

(see page 86). If you select the latter option, some of the steps in analyzing the target are skipped.

You may need to run more than one calibration cycle to ensure that the printer's calibration is in tolerance (see page 93).

Contents Back Next Index 77