Kodak ML-500 manual Setting the Power Saver, Setting the Media Low Threshold

Configuration

Setting the Power Saver

To conserve energy, the ML-500 goes into a power save state after a specified period of inactivity. You can specify the amount of time that the printer remains inactive before the power saver takes effect.

1.Click the General tab (see page 27).

2.Select the Power saver check box if it is not already selected.

3.Select the number of minutes of inactivity.

4.Click Apply.

NOTE: Pressing any printer button "awakens" the printer from the power saver.

Setting the Media Low Threshold

You can specify the media low threshold. When the ribbon or paper reaches this threshold, a media low status appears in the Status Bar and in the Media Supply area on the General tab.

1.Click the General tab (see page 27).

2.Enter a number between 10 and 500 ft (3.018 and 152.4 m).

3.Click Apply.

Contents Back Next Index 29