Kodak ML-500 manual Performing a Complete Calibration Analysis

Calibration

To make temporary color adjustments:

1.From the Calibration menu select Send LUT to Printer.

2.Select a Media name from the drop-down list, then click Next. (If there is only one media type in the calibration database, omit this step.)

3.Select an event number and date, then click Next.

4.Select Apply Master Balance to apply a temporary adjustment to the colors for this print job.

5.Adjust the temporary values for the Red, Blue, Green, and Density and click Next.

6.Ensure that all printing has stopped, then click Finish in the Send LUT to Printer dialog box. NOTE: When sending a temporary color adjustment, the final dialog box is a different color than the other dialog boxes in the wizard.

Performing a Complete Calibration Analysis

Performing a complete calibration cycle includes

printing and analyzing a calibration target.

If you perform a complete calibration cycle, you

cannot print anything else until the cycle is

complete.

1.From the Calibration menu select Perform Complete Calibration Cycle.

2.Select the media to calibrate, then click Next.

3.Select a starting point (see page 78).

NOTE: If you select Designated Calibration Event as a staring point, you must select an event number and date from the drop-down list.

4.Click Next to print the calibration target.

5.Analyze the target (see page 80).

Contents Back Next Index 86