Kodak ML-500 manual Copy an image file into the Source folder see

Print Server

To create a print job when images are on a different computer than the ML-500 Print Server:

NOTE: Images are deleted from the Source folder after a job has run.

✔Copy an image file into the Source folder (see page 44).

To create a print job when images are on the same computer as the ML-500 Print Server:

NOTE: Images are not deleted after a job has run.

✔Drag and drop individual image files or groups of image files into the print queue on the Print Server screen. Change settings, if needed, then click OK.

✔Manually create a print job using the Enqueue command (see page 47).

Unless you specify otherwise, printing starts when one print job is in the print queue. You can change the print queue limits (see page 68), or you can override them by forcing printing (see page 65).

When you increase the number of jobs before printing starts by changing the print queue limits, less paper is used.

NOTE: If printing does not start, check that printing is not suspended (see page 64).

Contents Back Next Index 46