System Requirements and Installation

Installing the WINDOWS 98/Me Driver on the Server System

1.From the Start menu select Settings, then select Printers. Right-click the ML-500 printer and select Properties.

2.Click the Sharing tab and click the Additional Drivers button.

3.Select the INTEL WINDOWS 9x environment and version and click OK.

4.You will be prompted to place the ML-500 Software CD in your drive. Ensure the CD is in the drive and click OK.

5.Browse to the English/Printer_Driver/

Win 98 Win Me folder on the CD and select the ML500.INF file. Click OK.

6.The driver will be installed and the Sharing tab reappears. Click Close.

Installing the WINDOWS NT Driver on the Server System

1.For proper operation of the WINDOWS NT 4.0 printer driver, you must first install the WINDOWS 2000 printer driver (see page 10) on the ML-500 Print Server.

2.After installing the WINDOWS 2000 printer driver, install the WINDOWS NT 4.0 printer driver on the same Print Server using the KODAK PROFESSIONAL ML-500 Digital Photo Print System CD. When asked to select a port, choose the same EKSDn port as selected for the WINDOWS 2000 printer driver. Be sure to specify a share name that identifies this driver specifically for WINDOWS NT 4.0 users.

NOTE: Do not install this driver under the Additional Drivers window of the WINDOWS 2000 printer driver's Sharing tab. You would have no control over the default printing preferences.

 

Contents

 

Back

 

Next

 

Index

12

 

 

 

 

 

 

 

 

 

Page 25
Image 25
Kodak ML-500 manual Installing the Windows 98/Me Driver on the Server System, Browse to the English/PrinterDriver