System Requirements and Installation

6.Click the Add Port button.

7.Click the New Port Type... button.

8.On the CD drive, browse to the Port Monitor folder in the appropriate language folder (for example, <CD drive>:\English\Port Monitor).

9.Select the appropriate .INF file:

WINDOWS 2000: select the MONITOR.INF file.

WINDOWS XP: select the EKSDPM.INF file.

10.Click Open, then click OK.

11.Select Kodak Source Directory Port from the list then click the New Port... button.

12.Specify a port number (1-999) and the name of the Source folder you wish to use. Click OK. Close dialog boxes until the Printers window comes to the front.

If you did not verify the Source folder in step 1, you will not be able to complete this step.

13.Install the appropriate ML-500 printer drivers for the operating system you will be printing from. Be sure to select the EKSD local port for the printer driver to use, and share the printer over the network.

See the following instructions for specific installation details.

 

Contents

 

Back

 

Next

 

Index

9

 

 

 

 

 

 

 

 

 

Page 22
Image 22
Kodak ML-500 manual System Requirements and Installation