Korg D1200 SYSTEM/USB, Control: Foot switch and control change device (pedal/MIDI) settings, MIDI: MIDI settings, Reference, [01...16], [On, Off], [On, Off], [On, Off]

Reference

SYSTEM/USB

Control: Foot switch and control change device (pedal/MIDI) settings

1				2
	3	4
1. Pol(FootSwPolarity)		...................................	[–, +]

Specifies the polarity of the foot switch.

Connect a foot switch (separately sold option: PS-1 or equivalent) to the front panel [FOOT SWITCH] jack, and set this parameter so that the “” symbol lights when you press the foot switch.

2.Func(FootSwFunction) ........................................[PunchInOut, Play/Stop, Mark]

Selects the function that will be controlled by the foot switch.

4. Ass(CtrlChgAssign) ............... [ExpOff, InsEff1...4]

Selects the insert effect that will be controlled.

The insert effect you select here will be controlled by the specified “Device.”

ExpOff: No insert effect will be controlled.

InsEff1, InsEff2, InsEff3, InsEff4: Insert effect 1, 2, 3, or

4 will be controlled respectively.

If the effect program you are using does not have a control function, the effect will not be controlled. (→ p.127–)

MIDI: MIDI settings

2

1 3

5

4

On the D1200 you can use MIDI to do the following things.

•Control effects (→ p.44, 87)

•Synchronize with a sequencer or other MIDI device (→ p.51)

•Switch scenes (→ p.39)

•Use control changes to control mixer parameters

COUNTER

MODELING

INSERT EFFECT

EQ

MASTER EFFECT/ AUX SEND

FINAL EFFECT

BOUNCE

CD

TUNER

PunchIn-Out:Perform manual punch-in and punch-out (i.e., switch between recording and playback).

Set the [TRACK STATUS] key of the desired track to REC, and begin playback. Recording will begin the moment you press the foot switch, and will end when you press the foot switch once again. (→ p.53) Play/Stop: Switch between playback start and stop. Press the foot switch to start playback, and press it again to stop playback.

Mark: Register a mark. When you press the foot switch, a mark will be registered at that time location.

While this tab page is displayed, the foot switch is used to detect the polarity, and the function selected here will not operate. Also, while recording tap tempo, the foot switch will be used for tap tempo input regardless of the setting you specify here. (→ p.52)

3.Device(CtrlChgDevice)........................................[Pedal, A.Touch, PitchBend, Velocity, NoteNum, CC#000...119]

Selects the external device that will control one of the D1200’s internal effects. The effect you specify in “Ass” can be controlled in realtime.

Pedal: An expression pedal will control the effect. Connect an expression pedal (such as the separately sold XVP-10 or EXP-2) to the [EXPRESSION PEDAL] jack, and move the pedal to control the effect.

A.Touch, PitchBend, Velocity, NoteNum: MIDI after- touch, pitch bend, velocity, or note number data will control the effect.

Connect the MIDI OUT of an external MIDI device to the D1200’s MIDI IN connector, and transmit the appropriate MIDI data from the external MIDI device to control the effect.

CC(Control Change) #000...119: A MIDI control change number will control the effect.

Connect the MIDI OUT of an external MIDI device to the D1200’s MIDI IN connector, and transmit the appro- priate MIDI control change message from the external MIDI device to control the effect.

1. GlobalCh(GlobalChannel) ..................... [01...16]

Specifies the global MIDI channel.

If the D1200 is connected via MIDI to an external MIDI device, the D1200 will be able to exchange MIDI messages with the external device if its “GlobalCh” is set to match the MIDI channel of the external device.

Make this setting when you want to do the following things.

•Set “Device” to a MIDI message other than “Pedal,” and control an effect from an external device.

•Use program change messages to transmit or receive D1200 scene changes.

2. ProgramChange: Trans ........................ [On, Off]

Switches program change message transmission on/off. Program change messages will be sent when you switch scenes or execute a store or recall operation.

3. ProgramChange: Recv ......................... [On, Off]

Switches program change message reception on/off. When the D1200 receives a program change message, it will switch scenes.

4. ControlChange: Trans .......................... [On, Off]

Switches control change message transmission on/off. Control change messages will be transmitted when you operate a mixer parameter.

Control change messages transmitted from the D1200 can be recorded on an external MIDI sequencer.

5. ControlChange: Recv ........................... [On, Off]

Switches control change reception on/off.

Control change messages recorded on an external MIDI sequencer can be received by the D1200 to control the corresponding mixer parameters.

For details on the parameters that can be controlled, refer to the MIDI implementation chart (→ p.160).

RHYTHM

INPUT/ OUTPUT/ SOLO

SYSTEM/ USB

TRACK

SONG

IN/LOC1, …END/LOC4

MARK

SCENE

AUTO PUNCH

LOOP

TRIGGER

SCRUB

METER/ TRACK VIEW

UNDO

101