Effect Parameter List

98: MN11: Expander

This effect makes the sound tighter and improves the dynamic range and S/N ratio by compressing signals that are below a specified level.

Thrshl (Threshold) ...............................

0

...127

Sets the level at which the effect begins

 

 

 

to apply

Attack (Attack) .....................................

1

...100

Specifies the length of the attack

Relse (Release)...................................

1

...100

Specifies the length of the release

Ratio (Ratio) .................................

1.0:1...

inf:1

Specifies the compression ratio

Respo (Response) ..............................

1

...100

Specifies the speed at which change will

 

 

 

occur in response to the input

 

 

 

 

Effect Control

Cntrl (Control)

Select the parameter that will be controlled by an expression pedal or an external MIDI controller, and specify the range of parameter values for control.

Param (Parameter) .....................................

*** Name of parameter to be controlled

Max.............................................................

***

Maximum value of parameter to be con-

 

 

trolled

Min..............................................................

***

Minimum value of parameter to be con-

 

 

trolled

 

 

 

: Param

Select the parameter to be controlled. The parameters that can be selected will differ depending on the program.

For example, the “Cho/Fl-Depth” selection for “Param” will control the “Depth” parameter of the Cho/Fl. When this is “Off,” control will not occur.

: Max, : Min

Specify the upper and lower limits of the range in which the parameter value will be controlled. By exchanging the “Max” and “Min” values, you can (for example) reverse the effect that occurs when a pedal is advanced and released.

The available values will depend on the effect. “Max” and

“Min” will not be displayed when “Param” is set to “Off” or “Wah.”

Using a pedal to control wah

1As explained in “5. Controlling an effect from an external device” (→ p.44), make settings for “Device” etc. and select

an effect program that provides a wah.

2Press the “(EffectIcon)” button for “Cntrl,” and set “Param” to “Wah.”

3Press the “(EffectIcon)” button for “Wah,” and set “Mode” to “Pedal.”

Modeling effects

Guitar type

Uses insert effect [I055 PA1: Brit70’s]

Bass type

Uses insert effect [I071 EB1: BassTubeComp]

Mic type

Uses insert effect [I074 MS1: MicSimVox87]

Insert (2in2outx2)/

Master/Final Effect

 

 

 

 

(2in2outx2),

Final

Insert

 

 

 

 

 

Insert (1in2outx2)

 

 

 

 

 

Insert (1in1outx4)

 

 

 

 

 

InsertI )(1in1outx8)

 

 

 

 

 

Effect Control

 

 

 

 

 

Modeling effects

 

 

 

141