To select a song in a non-adjacent location

1Press the [SONG] key to access the “SelSong” tab page.

2

2Move the cursor to “SongNumber,” and turn the [VALUE] dial to select a song number.

To select a song from the song list

1Press the [SONG] key to access the “SelSong” tab page.

2

2Select the “ ” button located at the left of the song number, and press the [ENTER] key.

The song list will appear.

3Turn the [VALUE] dial or use the / buttons to select a song, press the [ENTER] key, and then press the [YES/OK] key.

2. Using the counter display

The counter indicates the current location within the selected song. You can use the counter to program in and out points, to “mark” locations, and to pinpoint an exact location when using the “scrub” function.

2-1. Switching the counter display

You can select the type of units that the counter will use to display the current location.

1

1Select the “” button at the left of the counter, and press the [ENTER] key to access the “Select Time Disp Type” dialog box.

2Select a location display method and press the [YES/ OK] key.

You can choose from the following four methods.

•

 

. .

 

“measures”, “beats”, “1/96th beats”

 

 

 

 

 

 

 

•

 

: .

 

“minutes”, “seconds”, “1/1000th sec-

 

 

 

 

 

 

onds”

•: . F “minutes”, “seconds”, “1/30 seconds”

•. Free “minutes” .”seconds” (remaining amount of recording time)

To check the remaining recording time

Access the “Select Time Disp Type” dialog box, and choose “ . Free.”

To determine the correct “ . Free” time, set [TRACK STATUS] to REC for all the tracks that you want to record. The display will indicate the recording time that is available for recording on each track that is set to REC.

2-2. Changing the current location

Using the counter to move to a new location

1Select a page in which the upper part of the display shows the counter, such as the [SONG] “SelSong” tab page.

2In the counter, select the time field (e.g., measures, min- utes, seconds) that you want to change.

3Turn the [VALUE] dial to move the current location.

Using [FF] and [REW] to move to a new location

Moving backward

Press the [REW] key to move backward in the song. You will move continuously if you keep holding [REW] down.

You may also use this method to move during playback.

Moving forward

Press the [FF] key to move forward in the song. You will move continuously if you keep holding [FF] down.

You may also use this method to move during playback.

Moving to the beginning of the song

If you are currently not at the begining of the song, hold down the [STOP] key and press the [REW] key to move to the beginning of the song.

Moving to the end of the song

If you are currently not at the end of the song, hold down the [STOP] key and press the [FF] key to move to the end of the song.

32