Korg D1200 AUTO PUNCH, AtPunch: Settings for auto punch-in/out recording, 5a, 5b, 4c4b, 5. Wave, [On, Off], [00...10], [00...10], 4. RolTime, [000:00.000, (000:00.000...)

AUTO PUNCH

AtPunch: Settings for auto punch-in/ out recording

Auto punch-in/out recording is a function that automatically starts recording (punch-in) and stops recording (punch- out) at the locations you specify ahead of time.

If “AutoPunch” is “On” when you record, punch-in/out recording will be performed.

1				4

			5


2	3
1. AutoPunch ...........................................		[On, Off]

Switches the auto punch-in/out recording function on/ off.

On: Auto punch recording will be used when you record. If this is “On,” the [AUTO PUNCH] key will light.

When you begin recording, playback will begin prior to the IN time by the length of the speciﬁed pre-roll time. Actual recording will occur in the IN-OUTregion, and playback will then stop following the speciﬁed post-roll time. (→ “RolTime”)

Off: Recording will occur normally.

2. In ..............................................

(000:00.000...)

Displays the auto punch-in time (the location at which recording will begin).

This location can be speciﬁed by using the [STORE] key and the [IN/LOC1] key, or speciﬁed in the “Wave” dis- play.

3. Out ...........................................

(000:00.000...)

Displays the auto punch-out time (the location at which recording will end).

This location can be speciﬁed by using the [STORE] key and the [OUT/LOC2] key, or speciﬁed in the “Wave” display.

4. RolTime ............................................................

Speciﬁes the pre-rolland post-rolltimes used for auto punch-in/out.

4c4b

4a. PreRoll...........................................

[00...10]

Speciﬁes the duration of playback that will precede punch-in (IN).

4b. PostRoll .........................................

[00...10]

Speciﬁes the duration of playback that will follow punch-out (OUT).

4c. Unit........................

[Second, Meas(Measure)]

Selects the unit for setting the pre-roll and post-roll times.

You can choose “Second” or “Meas” (measure). Press the [YES/OK] key to apply the speciﬁed pre-roll and post-roll times, or press the [NO/CANCEL] key to cancel any changes.

PreRoll		IN(LOC 1)		OUT(LOC 2)		PostRoll


	Playback		Recording		Playback
	Start recording			Stop recording

	Auto punch-in/out recording
	LOOP recording (repeat this region)

5. Wave ...............................................................

Here you can view the audio waveform and set IN and OUT locations more precisely.

you can also use the Play From/Play To and Slow Play functions. (→ p.124)

	5d	5b
5a.	In ........................................	[000:00.000	...]
5b.	Out......................................	[000:00.000...	]

Speciﬁes the IN and OUT points.

When you place the cursor at “In” or “Out,” the track chosen in “TrackSelect” will automatically be soloed and the Scrub function will be turned on, so that you will hear only that track when you turn the [VALUE] dial.

5c. TrackSelect ...............................

[Track1...12]

Selects the track whose waveform will be displayed and which will be played. Press the “ ” button and choose from the list.

5d. Zoom In/Out/Up/Down..............................

Adjusts the size of the waveform display and the playback speed.

: Expands the waveform display vertically.

: Shrinks the waveform display vertically.

: Expands the waveform display horizontally. : Shrinks the waveform display horizontally.

When you press the [YES/OK] key, the time locations speciﬁed for “In” and “Out” will be overwritten onto the [IN/LOC1] and [OUT/LOC2] keys. If you press the [NO/CANCEL] key, your settings will be cancelled.

122