Korg D1200 TUNER, RHYTHM, SetUp: Specify the tempo and rhythm, 3. Calib, Reference, (–50...+50), 1.TempoSource, 2. NoteDisplay, [40...240, (***)], [(01/04...16/16)]

			Reference
	TUNER		RHYTHM
Here you can use the built-in tuner to tune an instrument		Here you can make settings for the tempo, time signature,
connected to the [INPUT 1/GUITAR IN] jack.		and rhythm (metronome) of the song.
	You cannot select this page while recording or playing.	If the counter is displaying “MBT” (measure, beat, 1/96th
	Nor can you record while in this page.	beat), the counter will operate according to the specified
	So that the pitch can be detected accurately, effects will	tempo.
			Tempo/rhythm settings can also be made in the
	automatically be turned off while this page is displayed.
			[SONG] “SelSong” tab page (→ p.116).

COUNTER

MODELING

INSERT EFFECT

1

32

1. CENT Scale ...................................... (–50...+50)

When the tuning is correct, the “ ” symbol will be at the 0 position in the middle of the meter, and the “” flat indicator and ““ sharp indicator will both light. If the pitch is flat, only the “” flat indicator will light. If the pitch is sharp, only the ““ sharp indicator will light.

The pitch deviation is displayed in units of cents. (100 cents is one semitone, and 1200 cents is one octave.)

2. NoteDisplay.............................................	(C...B)
Indicates the name of the note that is closest to the input
pitch.
It is not possible to detect two or more pitches simulta-
neously.

3. Calib .................................. [435...440...445Hz]

Adjusts the calibration frequency.

Normally you will leave this set to “440.”

SetUp: Specify the tempo and rhythm

7

1 3

6

4 5 2

1.TempoSource.....................................................[Manual, TempoMap, TempoTrack]

Specifies the tempo source.

Press the “” button and make your selection in the dialog box that appears.

Manual: The current “Tempo” and “Beat” settings will be used. It will not be possible to automatically change the tempo, time signature, and rhythm pattern during the song.

TempoMap: The tempo, time signature, and rhythm pattern will change automatically during the song, according to the tempo maps you create. Use the “Tmp- Map” tab page to create tempo maps.

TempoTrack: The tempo will be determined by the recorded tap tempo or MIDI clock. Use the “TmpTrack” tab page to record tap tempo or sequencer tempo, and then select “TempoTrack” here.

The time signature will follow the settings you created in the “TmpMap” tab page.

“TempoTrack” can be selected after the data is created.

2. Tempo........................................ [40...240, (***)]

Specifies the tempo when “TempoSource” is set to “Manual.”

If “TempoSource” is set to “TempoMap,” this area will indicate the tempo for the current time location as speci- fied by the tempo maps you created in the “TmpMap” tab page. If “TempoSource” is set to “TempoTrack,” this area will indicate “***.”

The range is
=40–240.

3. Beat....................................... [(01/04...16/16)]

Specifies the time signature when “TempoSource” is set to “Manual.”

If “TempoSource” is set to “TempoMap” or “Tem- poTrack,” this area will indicate the time signature for

	EQ
MASTER	EFFECT/	AUX SEND
FINAL EFFECT
	BOUNCE
	CD
	TUNER
	RHYTHM
INPUT/	OUTPUT/	SOLO
SYSTEM/ USB
	TRACK
	SONG
IN/LOC1, …END/LOC4
	MARK
	SCENE
AUTO PUNCH
	LOOP
	TRIGGER
	SCRUB
METER/ TRACK VIEW
	UNDO

95