3-3. Recalling a scene

At any time, you can manually recall the mixer settings registered in a scene, regardless of the time at which the scene was registered.

To recall the mixer settings registered in a scene

2

1

1Access the [SCENE] “ReadDel” tab page, and turn “Sce- neRead” off.

• When this is off, the [SCENE] key will be dark.

If “SceneRead” is “On,” it will not be possible to recall a scene that was registered at another time location.

2Recall the scene.

In the [SCENE] “ReadDel” or “MixView” tab page, move the cursor to “SceneNumber” and turn the [VALUE] dial to select a scene. The selected scene will be recalled.

2Move to the location where you want to re-register the scene. (→ p.32)

3Press the [STORE] key and then the [SCENE] key.

3-6. Editing and overwriting a scene

Here’s how to edit the settings of a scene and overwrite the changes onto the existing scene.

1As described in “3-3. Recalling a scene,” recall the scene that you want to edit.

2Adjust the [CHANNEL] faders, [PAN] knobs, EQ, and effects etc. to the desired settings.

3In the [SCENE] “ReadDel” tab page, make sure that the scene number you want to overwrite is selected.

•Select the “OvrWrt” button and press the [ENTER] key.

3-4. Changing the time at which a scene is registered

You can change the counter location of a registered scene, so that it is selected at a different place in the song.

2

1Recall the scene.

As described in “3-3. Recalling a scene,” select the scene whose time you want to change.

2Change the time of the scene.

•Select the “EditLoc” button and press the [ENTER] key.

Press the [YES/OK] key to overwrite the settings for that scene number.

3-7. Deleting a scene

Here’s how to delete an unwanted scene.

This operation cannot be undone.

2

1 As described in “3-3. Recalling a scene,” recall the scene that you want to delete. If you want to delete all scenes, select any of the scenes.

2 In the [SCENE] “ReadDel” tab page, select the “Delete” button and press the [ENTER] key.

•Specify the desired counter locatioin in the dialog box, and press the [YES/OK] key.

3-5. Re-registering a scene at another time location

You can re-register the same scene at different locations.

1Recall the scene that contains the mixer settings you want to re-register.

As described in “3-3. Recalling a scene,” recall the desired scene.

Verify the “Delete Scene” number shown in the upper left, and if this is the scene you want to delete, press the

40