5. Using the CDRW-1

For details on how to back up and restore using the CDRW- 1, and how to use the CDRW-1 to create an audio CD, refer to “Operation.”

When using the CDRW-1, you must operate the unit in a level position in a location that is not subject to vibra- tion.

Playing back an audio CD

Here’s how to play back an audio CD and listen to it through your headphones or monitor speakers.

1Connect headphones to the [PHONES] jack or monitor speakers to the [MONITOR OUT L/R] jacks, and turn down the level knobs for each jack to the minimum vol- ume.

2Insert an audio CD in the CDRW-1.

Press the eject button of the CDRW-1, open the disc tray, and insert the audio CD.

3Play back the audio CD.

Access the [CD] “CDR/RW” tab page. Use the cursor to

select the CDR/RW transport key, and press the [ENTER] key.

4Press the “CD Monitor” button, and gradually raise the [PHONES] or [MONITOR OUT L/R] volume level.

Recording the sound of an audio CD

Here’s how to assign the L channel of an audio CD to track 1, the R channel to track 2, and record the sound of the CD.

1Insert an audio CD in the CDRW-1.

2Assign the audio output from the CDRW-1 to tracks 1 and 2.

Access the [INPUT/OUTPUT/SOLO] “Ch1-6” tab page, select the “Ch1” icon, and use the [VALUE] dial to select “CD L.”

In the same way, select the “Ch2” icon and select “CD R.”

3Specify the recording tracks.

Press the [TRACK STATUS] keys of tracks 1 and 2 to select REC.

4Check the recording mode.

Access the [BOUNCE] “RecMode” tab page. Set “Selec- tRecMode” to “Input.”

5Press the [REC] key to enter record-ready mode.

6Play back the audio CD.

Access the [CD] “CDR/RW” tab page. Use the cursor to

select the CD-R/RW transport key, and press the [ENTER] key.

7Press the [PLAY] key to begin recording.

8When you are finished recording, press the [STOP] key.

9Stop the audio CD.

Access the [CD] “CDR/RW” tab page. Move the cursor

to the CD-R/RW transport key, and press the [ENTER] key.

0Play back the song, and verify that it was recorded cor- rectly.

The beginning of recording on the D1200 is not synchronized with the beginning of playback of the CD in the CDRW-1. This means that the above method cannot be used to record the very beginning of the audio CD. If you want to record from the beginning of a song, make Trigger settings before step 4 of this procedure.

(→ p.54)

Appendix

Troubleshooting

Rhythm Pattern List Effect Program List D1200 specifications About the CDRW-1Messages

Index

MIDI implementationBlock diagram chart

151