Operation

3-2. Exporting (writing) a WAV file

You can export (write) audio data as a WAV file in the following formats.

Sampling frequency: 44.1 kHz

Bit depth: 16-bit, 24-bit

Channels: 1 (monaural), 2 (stereo)

When exporting to a CD-R/RW disc, you can export additional files to the same disc at a later time.

Exported WAV file data can be read by the D1200 or by a computer even if the disc has not been finalized.

WAV files exported to a CD-R/RW are in ISO9660 level 1 format.

Files exported to the internal USB drive can be saved to your computer.

Exporting a WAV file

Here’s how you can copy the IN–OUT region of tracks 1 and 2 in a 16-bit song to the clipboard, and export this audio data to a stereo WAV file named “D1200_ST.WAV.

1 Select a 16-bit song that you created. (→ p.31: “1-3. Selecting different songs”)

7Specify the date and time of the WAV file.

•Press the “Date” button to access the dialog box, move the cursor to the date or time you want to change, and use the [VALUE] dial to set the data and/or time.

8Export the clipboard data.

•Select the “Exec.” button and press the [ENTER] key.

•The display will ask “AreYouSure?.” Press the [YES/ OK] key to execute.

•When the operation has been executed, the display will indicate “Completed.” Press the [YES/OK] key.

Exporting multiple WAV files

2Register the IN and OUT locations. (→ p.33, 118)

3Copy the track data to the clipboard.

•In the [TRACK] “EditTrk” tab page, set “EditType” to “CopyTrack.”

•Set “SourceTrack” to “1–2.”

•Set “DestTrack” to “Clip2.”

The number indicates the number of tracks in the clip- board.

•Select the “Exec.” button and press the [ENTER] key.

•The display will ask “AreYouSure?” Press the [YES/ OK] key to execute.

•When the operation has been executed, the display will indicate “Completed.” Press the [YES/OK] key.

4Select the Export function.

Access the [TRACK] “Export” tab page.

6 7

8

5

5Select the export-destination drive.

For this example, select the USB drive “U:USB DOS.”

6Edit the name of the WAV file.

If you want to change the name of the file, select the

“Rename” button and press the [ENTER] key. Edit the name in the “RenameFile” dialog box. (→ p.31)

When you export a stereo WAV file, the 7th and 8th characters of the file name will automatically be set to “ST.” For a monaural file, this will be “MN.”

The file cannot be saved if an identically-named file already exists on the USB drive.

When you export four or more tracks at once, each track will be saved as a monaural file.

Here’s how to copy the IN–OUT region of tracks 1–6 of the 24-bit song 003 to the clipboard, and export them to a CD-R/RW disc as six monaural WAV files named “D1200_1.WAV”–“D1200_6.WAV.”

1Insert a CD-R/RW disc into the CD-R/RW drive. When exporting WAV files to the CD-R/RW drive, you can use either a blank CD-R/RW disc or an unfinalized ISO9660 format CD-R/RW disc.

2 Select a 24-bit song that you created. (→ p.31: “1-3. Selecting different songs”)

3Register the IN and OUT locations. (→ p.33)

4Copy the track data to the clipboard.

•In the [TRACK] “EditTrk” tab page, set “EditType” to “CopyTrack.”

•Set “SourceTrack” to “1–6.”

•Set “DestTrack” to “Clip6.”

The number indicates the number of tracks in the clip- board.

•Select the “Exec.” button and press the [ENTER] key.

•The display will ask “AreYouSure?” Press the [YES/ OK] key to execute.

•When the operation has been executed, the display will indicate “Completed.” Press the [YES/OK] key.

5Select the Export function.

Access the [TRACK] “Export” tab page.

7 8 9

0

6

73