Korg D1200 INSERT EFFECT, InsAss: Specify the insert location and type of the insert effects, [01, 80], [000, 100], Reference, [001...100], 5. Factory Data

Reference

You can also select the type by moving the cursor to “CABINET” and turning the [VALUE] dial.

5. Factory Data.....................................................

Returns the selected modeling effect to the factory set- tings.

Modeling 2

If you want to make more detailed adjustments, move the cursor to “DRIVE,” “TONE,” or “CABINET,” and press the [ENTER] key.

As an example, here are the settings that will appear if you select “DRIVE.”

You can apply insert effects to analog input sources as you record them, or to the playback of a tracks.

On the D1200 you can use up to eight insert effects simulta- neously.

Insert effects cannot be used if “DigiIn” has been turned “On” in the [INPUT/OUTPUT/SOLO] “Ch1–6” or “Ch7–12” tab page.

COUNTER

	2	3	4
1.	Exit...................................................................
	Returns to the Modeling 1 screen.
2.	DRIVE ..............................................		[001...100]

Adjusts the depth of distortion.

•Turn the knob located below “DRIVE” to adjust the setting.

•You can also adjust the setting by moving the cursor to “DRIVE” and turning the [VALUE] dial.

2	3
1. Assign .........................	[In(Input), Trk(PlayTrack)]

Selects whether the insert effect will be applied to the analog input or to a playback track.

In (Input): Select this when you want to apply an effect to the analog input from an [INPUT 1/GUITAR IN]– [INPUT 4] jack.

Trk (PlayTrack): Select this when you want to apply an effect to a playback track.

3.	LEVEL...............................................	[000...	100]	2. SelectEffType .....................................................
	Adjusts the volume of the effect.			[1in2outx2, 2in2outx2, 1in1outx4, 1in1outx8]
	Adjusts the volume of the effect.			Selects the structure of the insert effects.
	• Turn the knob located below “TONE” to adjust the			Selects the structure of the insert effects.
	setting.			The available effect programs will depend on this set-
	• You can also adjust the setting by moving the cursor			ting. For the effects that are available with each struc-
	to “TONE” and turning the [VALUE] dial.			ture, refer to “Effect Program List” (→ p.154).
4.	NR(NoiseReduction)..............................	[01...	80]

Adjusts the level at which noise reduction is applied.

•Turn the knob located below “CABINET” to adjust the setting.

•You can also adjust the setting by moving the cursor to “CABINET” and turning the [VALUE] dial.

1in2outx2 or 1in1outx2: Select this when you want to use two mono-in/stereo-out effects.

This is ideal when you want to add spaciousness to a lead guitar or vocal. The effects can also be used as 1-in/ 1-out monaural effects.

You cannot select this if “Assign” is set to “Trk.” 2in2outx2: Select this when you want to use two stereo- in/stereo-out effects.

This is ideal for use with stereo input sources such as keyboard.

1in1outx4: Select this when you want to use four mono- in/mono-out effects.

This is ideal for sources with a ﬁxed pan position, such as rhythm guitar.

1in1outx8: Select this when you want to use eight mono-in/mono-out effects.

This is ideal for sources with a ﬁxed pan position, such as drums.

You cannot select this if “Assign” is set to “In.”