Korg D1200 InsEff4: Select and edit insert effect, Eq1–4:Adjust the EQ for mixer channels 1–4, Eq5–8:Adjust the EQ for mixer channels 5

InsEff4: Select and edit insert effect 4

Here you can make selections and settings for insert effect 4. This will be displayed only if you set “SelectEffType” to “1in1outx4” or “1in1outx8” in the “InsAss” tab page

(→ p.85).

Refer to “InsEff1: Select and edit insert effect 1” (→ p.86).

InsEff5–8: Select and edit insert effects 5–8

Eq1–4: Adjust the EQ for mixer channels 1–4

Here you can apply EQ (equalization) to the playback of mixer channels 1–4. Make these settings when you want to apply EQ to the playback.

This is a three-band EQ with shelving-type high and low bands, and a mid-EQ with adjustable center frequency.

Here you can make selections and settings for insert effects 5–8.

This will be displayed only if you set “SelectEffType” to 1in1outx8” in the “InsAss” tab page (→ p.85).

For insert effects 5–8, use “SelectEffect5...8” to select an ef- fect, and then edit it.

1. SelectEffect5...8 .................

[Eff5, Eff6, Eff7, Eff8]

Select the insert effect 5–8 that will be displayed in this page. Editing, bypass settings, and rename etc. will apply only to the effect that is shown here.

For other details, refer to “InsEff1: Select and edit insert effect 1” (→ p.86)

3 4 2

1.TrackLevelMeter ................................................(1, 2, 3, 4/CLP, –8, –18, –42dB)

Displays the input level from each track. The horizontal axis indicates the channel, and the vertical axis indicates the level.

2. HighEq ...............

[(Fc=10kHz) –15.0...+15.0(dB)]

Speciﬁes the gain of the high EQ. This adjusts the high- frequency range of the sound.

This setting lets you boost or cut the region above 10 kHz in a range of –15.0 – +15.0 dB.

3.	MidFc .................................	[100Hz	...20.0k(Hz)]
	Speciﬁes the center frequency of the mid EQ, in a range
	of 100 Hz–20.0 kHz.
4.	MidEq...................................	[–15.0...	+15.0(dB)]

Speciﬁes the gain of the mid EQ. This adjusts the mid- frequency range of the sound.

This setting lets you boost or cut the region speciﬁed by MidFc in a range of –15.0 – +15.0 dB.

5. LowEq ................

[(Fc=100Hz) –15.0...+15.0(dB)]

Speciﬁes the gain of the low EQ. This adjusts the low- frequency range of the sound.

This setting lets you boost or cut the region below 100 Hz in a range of –15.0 – +15.0 dB.

6. Pair ..................................................................

Pairs adjacent mixer channels. (→ p.38, 86)

Eq5–8: Adjust the EQ for mixer channels 5–8

Here you can apply EQ (equalizer) to the playback of tracks 5–8.

Refer to “Eq1–4: Adjust the EQ for mixer channels 1–4.”