Korg D1200 Category: Large size effects, 32: LS1: St.Graphic 7band EQ, 35: LS4: St.Pitch Shifter, 33: LS2: St.Multiband Limiter, 34: LS3: Vocoder

Effect Parameter List

Insert (2in2outx2), Final

These algorithms can be selected for an insert effect if

“2in2outx2” is selected for “Select Eff Type”. They can also be selected for a final effect.

Large size LS1 – LS7

Category: Large size effects

32: LS1: St.Graphic 7band EQ

(Stereo Graphic 7band EQ)

This is a stereo 7-band graphic equalizer. The bar graph of the gain setting for each band gives you a clear, visual idea of frequency responses. You can select a center frequency setting for each band from twelve types, according to the sound.

Type (Type) ........	1:Wide1, 2:Wide2, 3:Wide3,		Selects a combination of center frequen-
4:HalfW1, 5:HalfW2, 6:HalfW3,			cies for each band
	7:Low, 8:WideLo, 9:Mid,
10:WideM, 11:High, 12:WideHi
Trim (Trim) ...........................................	0	...100	Sets the input level
B1 (Band1 [dB])...............................	–18...	+18	Sets the gain of Band 1
B2 (Band2 [dB])...............................	–18...	+18	Sets the gain of Band 2
B3 (Band3 [dB])...............................	–18...	+18	Sets the gain of Band 3
B4 (Band4 [dB])...............................	–18...	+18	Sets the gain of Band 4
B5 (Band5 [dB])...............................	–18...	+18	Sets the gain of Band 5
B6 (Band6 [dB])...............................	–18...	+18	Sets the gain of Band 6
B7 (Band7 [dB])...............................	–18...	+18	Sets the gain of Band 7
Mix (Wet/Dry) ................	Dry, 1:99...99:1, Wet		Sets the balance between the effect and
			dry sounds

: Type

Respo (Response) ..............................		0	...100	Sets the speed of the response to the
				modulator input
NLevel (Noise Level) ...........................		0	...100	Sets the noise mix level to the Carrier
LoGain (Low Gain [dB]) ..................		–12...	+12	Sets the low-range output level of the
				vocoder
HiGain (High Gain [dB]) ..................		–12...	+12	Sets the high-range output level of the
				vocoder
HiMix (Modulator High Mix).................		0...	100	Sets the high-range output level of the
				modulator
Bal (Vocoder/Carrier) ......	Carrier, 1:99...		99:1,	Sets the balance between the vocoder
		Vocode		output and the Carrier
Mix (Wet/Dry) .................	Dry, 1:99...	99:1, Wet		Sets the balance between the effect and
				dry sounds

: Formant Shift

By offsetting the Carrier filter, you can adjust the height of the frequency range to which the vocoder effect is applied. The tonal quality will change significantly.

: Noise Level

This parameter enables you to mix white noise with the Carrier.

: Modulator High Mix

This parameter sets the high-range output level of the right channel sound (Modulator). If the modulator is a human voice, it will make the words more clear.

: Vocoder/Carrier, : Wet/Dry

The “Vocoder/Carrier” parameter sets the balance between the vocoder sound and the left channel sound (Carrier). The “Wet/Dry” parameter sets the balance between the effect and dry sound. If you wish to change the intensity of the vocoder effect, select “Wet” for “Wet/Dry”, and adjust the balance using the “Vocoder/Carrier” parameter.

35: LS4: St.Pitch Shifter

(Stereo Pitch Shifter)

This is a stereo pitch shifter. The pitch shift amount for the left and right channels can be reversed from each other.

(1in1outx4) Insert (1in2outx2) InsertI (2in2outx2),), Insert (2in2outx2)/ FinalMaster/Final Effect

This parameter selects a combination of center frequencies for each band.

33: LS2: St.Multiband Limiter

(Stereo Multiband Limiter)

This is a stereo multiband limiter.

Ratio (Ratio) .....................	1.0:1...50.0:1, Inf:1		Sets the signal compression ratio
Thrshl (Threshold [dB])...................	–40...	0dB	Sets the level above which the compres-
			sor is applied
Attack (Attack) .....................................	1...	100	Sets the attack time
Relse (Release)...................................	1...	100	Sets the release time
LoOfst (Low Offset [dB]) .................	–40...	0dB	Sets the low range gain of trigger signal
MdOfst (Mid Offset [dB]).................	–40...	0dB	Sets the mid range gain of trigger signal
HiOfst (High Offset [dB]).................	–40...	0dB	Sets the high range gain of trigger signal
GLevel (Gain Adjust [dB])... –Inf, –38...+24dB			Sets the output gain
Mix (Wet/Dry) ................	Dry, 1:99...99:1, Wet		Sets the balance between the effect and
			dry sounds

Mode (Mode)...................	Slow, Medium, Fast				Switches Pitch Shifter mode
L/R (L/R Pitch) .....................		Normal, Up/Dwn			Determines whether or not the L/R pitch
					shift amount is inverted
*Pitch (Pitch Shift [1/2tone])		.............	–24...	+24	Sets the pitch shift amount in steps of a
					semitone
Fine (Fine [cent]).......................		–100...+100c			Sets the pitch shift amount in steps of
					one cent
LDly (Lch Delay [msec])...............		0...	1000ms		Sets the delay time for the left channel
RDly (Rch Delay [msec])..............		0...	1000ms		Sets the delay time for the right channel
FPoint (Feedback Position)		..............	Pre, Post		Switches the feedback connection
Fdback (Feedback) .....................		–100...		+100	Sets the feedback amount
HiDamp (High Damp [%]) ...................			0...	100	Sets the damping amount in the high
					range
Spread (Spread) .........................		–100...		+100	Sets the width of the stereo image of the
					effect sound
Mix (Wet/Dry) .................	Dry, 1:99...		99:1, Wet		Sets the balance between the effect and
					dry sounds

: L/R Pitch

Control Insert (1in1outx8) Insert

34: LS3: Vocoder

This effect applies the character of the right channel signal (Modulator) to the left channel signal input (Carrier). A common use of this effect is to produce the sound of various instruments by inputting a voice to the Modulator via a microphone. A special effect is also achieved by using rhythm or effect sounds. Strings or distortion guitar sounds with a lot of harmonics are suitable as a Carrier.

Carri (L [Carrier] Trim)..........................	0...	100	Sets the input level of left channel (Car-
			rier)
Modul (R [Modulator] Trim) ..................	0...	100	Sets the input level of right channel
			(Modulator)
Formnt (Formant Shift) ........................	–2...	+2	Sets the height of the frequency for the
			vocoder effect

When you select “Up/Dwn” for this parameter, the pitch shift amount for the right channel will be reversed. If the pitch shift amount is positive, the pitch of the left channel is raised, and the pitch of the right channel is lowered. If an expression pedal etc. is used to control the pitch, the pitch of the left channel will be con- trolled.

: Mode, Fine

If Cntrl is controlling Pitch and you change Mode or Fine, you must once again use Cntrl to readjust the Max and Min parameters.

36: LS5: Early Reflections L

This early reflection effect has more precise early reflections with twice the maximum length of a normal-size effect. You can create a very smooth and dense sound.

Type (Type)	.............................. Sharp, Loose,	Selects the decay curve for the early
	Modula, Revers	reflection

Effect

Modeling effects

133