Objects in the display and

their function

Objects in the display

To select an object shown in the display, use the [CURSOR] keys to select it, and press the [ENTER] key.

In this manual, references enclosed in double quotation marks such as “...”, “...” button, or “...” tab refer to objects in the display. On the other hand, references enclosed in square brackets such as [...] key, [...] knob, [...] dial, or [...] fader refer to controls or items on the front panel or rear panel of the D1200.

a: Current

 

c: Popup

d: Toggle

parameter

 

button

 

button

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

e: Tab page

b: Edit cell

a:Current parameter

This is the name of the parameter that is currently selected by the cursor.

In the case of icon-type parameters such as EQ or faders, the value is shown at the right.

b:Edit cell

This is a parameter that is underlined in the display. When you use the cursor to select an edit cell, the parameter value display will be highlighted, and can be edited.

To edit the parameter value in the edit cell, use the [VALUE] dial (→ p.8) or popup buttons in the display.

c:Popup button

When you select one of these buttons and press the [ENTER] key, a dialog box (f) will appear.

To input a parameter value, select the desired value in the dialog box.

, ,

d:Toggle button

This type of button will switch a function on/off each time you select it and press the [ENTER] key. The frame will become thicker when selected.

(on)/ (off)

e:Tab page

Each mode contains numerous parameters, which are organized into pages. These pages are divided by tabs.

g: Radio buttons

f: Dialog box

f:Dialog box

Press the [YES/OK] key to execute, or the [NO/CAN- CEL] key to close the dialog box without executing. You can also make your choice by selecting the “OK” or “Cancel” button, and pressing the [ENTER] key.

g:Radio buttons

This type of button is used to select one of multiple choices. Select one of the radio buttons and press the [ENTER] key.

h: Icons

h:Icons

These are objects shaped like sliders or knobs. To edit the value, select the icon and turn the [VALUE] dial.

i: Scroll buttons

i:Scroll buttons

Use these to see parameters that are not currently shown in the display.

12