Operation
Using the Locate keys

You can register a specific location in one of the Locate keys, and then jump instantly to that location.

You can register four locate points in each song using the [IN/LOC1], [OUT/LOC2], [TO/LOC3], and [END/LOC4] keys.

In addition to recalling the registered locate points, these keys are also used to specify the auto-punch recording times (IN/OUT) and the region for track edit- ing. For details on the Locate functions, refer to p.118.

3Press the [MARK] key to register a mark at the memo- rized location. Registration is completed as soon as you press the key. Marks are automatically renumbered according to their playback order.

Registering a location to one of the Locate keys

1

Use the counter (“Counter”) or the [FF]/[REW] keys to

 

Even while the song is playing or recording, you can

 

 

move to the location you want to register.

 

 

 

memorize the current location and register it as a mark.

2

Press the [STORE] key to memorize the location you

 

 

(The time at which you pressed the [STORE] key will be

 

 

 

selected.

registered.)

 

3Press either the [IN/LOC1], [OUT/LOC2], [TO/LOC3], or [END/LOC4] key to register the memorized location to that key. The registration is completed as soon as you press the key.

Even while the song is playing or recording, you can memorize the location by pressing the [STORE] key, and register it to one of the Locate keys.

Moving to a registered Locate time

When you press any of the [IN/LOC1], [OUT/LOC2], [TO/LOC3], or [END/LOC4] keys you will immediately move to the location regestered to that key

Using a Mark to move to a new location in the song

You can register up to 100 marks at desired locations throughout your song, and jump instantly to a registered mark.

You can give a name to each mark, and use it to remember a certain place within the song.

Up to 100 marks can be registered in each song.

Registering a mark

1Move to the location where you want to register a mark. Use the counter or the [FF]/[REW] keys to move.

2Press the [STORE] key to memorize the current location.

Moving to a registered Mark time

1Access the [MARK] “Mark” tab page.

3

2

2Use “MarkNumber” to select a mark.

3Select the “Recall” button and press the [ENTER] key to recall the mark.

You will move to the location of that mark.

Deleting a mark

A mark you deleted cannot be recovered by Undo.

1Access the [MARK] “Mark” tab page.

3

2

2Use “MarkNumber” to select the mark that you want to delete.

3Select the “Delete” button and press the [ENTER] key to open the dialog box.

4Verify that “Delete Mark” in the upper left indicates the mark you want to delete, and press the [YES/OK] key to delete the mark. If you decide not to delete the mark, press the [NO/CANCEL] key.

If you want to delete all marks, select the “SelectAll” button and press the [ENTER] key. Then press the [YES/ OK] key to delete all the marks.

33