Korg D1200 Category: Special Effect, 27: DY7: St.Parametric 4band EQ, 28: SE1: St.Ring Modulator, 29: SE2: Doppler, 30: SE3: St.Analog Record, 31: SE4: Talking Modulator

Korg D1200 Category: Special Effect, 27: DY7: St.Parametric 4band EQ, 28: SE1: St.Ring Modulator, 29: SE2: Doppler, 30: SE3: St.Analog Record, 31: SE4: Talking Modulator

: Resolution, : Output Level

If you set a smaller value for the “Resolution” parameter, the sound may be distorted. The volume level may also be changed. Use “Out- put Level” to adjust the level.

27: DY7: St.Parametric 4band EQ

(Stereo Parametric 4band EQ)

This is a stereo 4-band parametric equalizer. You can select peaking type or shelving type for Band 1 and 4.

Trim (Trim)...........................................		0...100		Sets the input level
B1Type (Band1 Type)...........		Peaking, ShelvL		Selects the type of Band 1
B4Type (Band4 Type)...........		Peaking, ShelvH		Selects the type of Band 4
Fc1 (Band1 Cutoff [Hz]) ...............		20...1.0kHz		Sets the center frequency of Band 1
Q1	(Q) .............................................	0.5	...10.0	Sets the bandwidth of Band 1
G1	(Gain [dB])...........................	–18.0...	+18.0	Sets the gain of Band 1
Fc2 (Band2 Cutoff [Hz]) .............		50...10.0kHz		Sets the center frequency of Band 2
Q2	(Q) .............................................	0.5	...10.0	Sets the bandwidth of Band 2
G2	(Gain [dB])...........................	–18.0...	+18.0	Sets the gain of Band 2
Fc3 (Band3 Cutoff [Hz]) ...........		300...10.0kHz		Sets the center frequency of Band 3
Q3	(Q) .............................................	0.5	...10.0	Sets the bandwidth of Band 3
G3	(Gain [dB])...........................	–18.0...	+18.0	Sets the gain of Band 3
Fc4 (Band4 Cutoff [Hz]) ...........		500...20.0kHz		Sets the center frequency of Band 4
Q4	(Q) .............................................	0.5	...10.0	Sets the bandwidth of Band 4
G4	(Gain [dB])...........................	–18.0...	+18.0	Sets the gain of Band 4
Mix (Wet/Dry) .................		Dry, 1:99...99:1, Wet		Sets the balance between the effect and
				dry sounds

:Band1 Type, : Band4 Type

Selects a ﬁlter type for Band 1 and 4.

Special Effect SE1 – SE4

Category: Special Effect

28: SE1: St.Ring Modulator

(Stereo Ring Modulator)

This effect creates a metallic sound by applying the oscillators to the input signal.

LPFLvl (Pre LPF) ................................			0...	100	Sets the damping amount of the high
					range input to the ring modulator
Fc (Fixed Frequency [Hz])............		0...	12.0kHz		Sets the oscillator frequency when OSC
					Mode is set to Fixed
Speed (LFO Frequency [Hz])....		0.02...	20.0Hz		Sets the LFO speed of the oscillator fre-
					quency modulation
Depth (LFO Depth) .............................			0...	100	Sets the depth of LFO modulation for the
					oscillator frequency
Mix (Wet/Dry) .................	Dry, 1:99...99:1, Wet				Sets the balance between the effect and
					dry sounds

: Pre LPF

This parameter enables you to set the damping amount of the high range sound input to the ring modulator. If the input sound contains lots of harmonics, the effect may sound dirty. In this case, cut a certain amount of high range.

: Fixed Frequency [Hz]

This parameter sets the oscillator frequency.

29: SE2: Doppler

This effect simulates the “Doppler effect” of a moving sound with a changing pitch, similar to the siren of an passing ambu- lance. Mixing the effect sound with the dry sound will create a unique chorus effect.

*Speed (LFO Frequency [Hz]) ....	0.02...20.0Hz		Sets the LFO speed
*Pitch (Pitch Depth) ..............................	0	...100	Sets the pitch variation of the moving
			sound
*Pan (Pan Depth)..........................	–100...	+100	Sets the panning of the moving sound

Mix (Wet/Dry) ................	Dry, 1:99...99:1, Wet Sets the balance between the effect and
	dry sounds

: Pitch Depth

With the Doppler effect, the pitch is raised when the sound approaches, and the pitch is lowered when the sound goes away. This parameter sets this pitch variation.

: Pan Depth

This parameter sets the width of the stereo image of the effect sound. With larger values, the sound seems to come and go from much further away. With positive values, the sound moves from left to right; with negative values, the sound moves from right to left.

30: SE3: St.Analog Record

(Stereo Analog Record)

This effect simulates the noise caused by scratches and dust on analog records. It also reproduces some of the modulation caused by a warped turntable.

RPM (Speed [RPM]).................	33 1/3, 45, 78			Sets the r.p.m. of a record
*Wah (Flutter)........................................		0	...100	Sets the modulation depth
NsDens (Noise Density) ......................		0...	100	Sets the noise density
NsTone (Noise Tone) ...........................		0...	100	Sets the noise tone
NsLvl (Noise Level) .............................		0...	100	Sets the noise level
ClkLvl (Click Level) ..............................		0	...100	Sets the click noise level
EQTrim (EQ Trim) ................................		0...	100	Sets the EQ input level
Fc (Pre EQ Cutoff [Hz]) ............	300	...10.0kHz		Sets the EQ center frequency
Q (Q) ...............................................		0.5...	10.0	Sets the EQ band width
GLevel (Gain [dB])......................	–18.0..+18.0			Sets the EQ gain
Mix (Wet/Dry) ................	Dry, 1:99...	99:1, Wet		Sets the balance between the effect and
				dry sounds

: Flutter

This parameter enables you to set the depth of the modulation caused by a warped turntable.

: Click Level

This parameter enables you to set the level of the click noise that occurs once every rotation of the turntable. This simulation reproduces record noise, and the noise generated after the music on a vinyl record ﬁnishes.

31: SE4: Talking Modulator

This effect gives the input signal a character similar to a human voice. It can create the impression of a talking guitar or synthe- sizer.

*Speed (LFO Frequency [Hz]).. 0.02		...20.00Hz		Sets the LFO speed
VTop (Voice Top) .........................	A, I, U, E, O			Selects a vowel sound at the top end of
				control
VCentr (Voice Center) .................	A, I, U, E, O			Selects a vowel sound in the center of
				control
VBotom (Voice Bottom) ...............	A, I, U, E, O			Selects a vowel sound at the bottom end
				of control
Formnt (Formant Shift) ................	–100...		+100	Sets the frequency to which the effect is
				applied
Reso (Resonance) ..............................		0...	100	Sets the Level of resonance of the voice
				pattern
Mix (Wet/Dry) ................	Dry, 1:99...	99:1, Wet		Sets the balance between the effect and
				dry sounds

: Formant Shift

This parameter adjusts the frequency level to which the effect is applied. If you wish to apply the effect to a higher-range sound, set this parameter to a higher value; to apply the effect to a lower-range sound, set this to a lower value.

: Resonance

This parameter sets the intensity of resonance for the voice pattern. A larger value will add more character to the sound.

132