Korg D1200 MixView: Viewing pan and fader scene data, 11.EDIT, 6. EDIT, 2. Level, Reference, [On, Off], 10.OvrWrt, [001...100], [000...127], 3. Pan/fader guide

						Reference
	Undo is not available for this Delete operation.			3. Pan/fader guide	[		]
				Displays a symbol to indicate the difference between the
		7a		actual fader or pan position and the value that is regis-
				tered in the scene.
				When you recall a scene, the current position of the
				fader may differ from the value registered in the scene.
				When you select the parameter for which you want to
	7a. SelectAll.........................................	[On, Off]
				resolve this discrepancy, a symbol will be displayed to
	All scenes will be selected for deletion.			indicate the difference between the internal value and
	On: All scenes will be selected for deletion.			the fader position.
	The scene number will be indicated as “***”.			Fader
	Off: The single scene number selected in			: The fader is more than 51 steps above the internal
	“SceneNumber” will be selected for deletion.			value.
8.	EditFilter ...........................................................			: The fader is 21–50 steps above the internal value.
					: The fader is 1–20 steps above the internal value.
	You can view and edit the “Filter” settings that are regis-			: The fader matches the internal value.
	tered in each scene.			: The fader is 1–20 steps below the internal value.
	Even when you store a scene with filtering applied, the			: The fader is 21–50 steps below the internal value.
	parameters at that time are actually saved. By changing			: The fader is more than 51 steps below the internal
				value.
	the filter settings in this page, you can recover the state
				Pan
	of those parameters at the time the scene was stored.
9.	Recall ...............................................................			: The pan knob is more than 51 steps to the left of the
					internal value.
	Recalls the settings that are registered in a scene.			: The pan knob is 21–50 steps to the left of the internal
	If you recall a scene and edit the EQ etc. and then press			value.
	the “Recall” button to recall the scene, the state prior to			: The fader knob is 1–20 steps to the left of the internal
	your editing (i.e., the mixer settings registered in the			value.
	scene) will be recalled.			: The fader knob matches the internal value.
10.OvrWrt				: The fader knob is 1–20 steps to the right of the inter-
			nal value.

Overwrites the current mixer settings onto the selected	: The fader knob is 21–50 steps to the right of the
	internal value.
scene number. Use this when you want to make fine
	: The fader knob is more than 51 steps to the right of
adjustments to the scene or replace it with a different
	the internal value.
scene.

	COUNTER
	MODELING
INSERT EFFECT
	EQ
MASTER	EFFECT/	AUX SEND
FINAL EFFECT
	BOUNCE
	CD
	TUNER
	RHYTHM
INPUT/	OUTPUT/	SOLO

11.EDIT..................................................................

This indicator will appear if the parameters of the scene have been edited from the state in which they were reg- istered.

MixView: Viewing pan and fader scene data

1

2

3 6 4 5

1. Pan/Balance... (Pan1...Pan6, Bal7–8...Bal11–12)

Displays the currently selected pan and balance settings. When you select an icon, the channel number and parameter value will appear in the upper left.

2. Level................ (Lev1...Lev6, Lev7–8...Lev11–12)

Displays the currently selected channel fader settings. When you select an icon, the channel number and parameter value will appear in the upper left.

If the level is unity gain, the display will indicate “.”

4. SceneNumber .................................. [001...100]

Recalls the mixer settings of the scene to the current time location. (→ p.120)

5. Master Level..................................... [000...127]

Indicates the level of the master fader.

If the level is at unity gain, this will indicate “”.

6. EDIT..................................................................

This indicator will appear if the parameters of the currently -recalled scene have been edited. You can register your changes by using “OvrWrt” in the [SCENE] “Read- Del” tab page.

SYSTEM/	USB
TRACK
SONG
IN/LOC1,	…END/LOC4
MARK
SCENE
AUTO	PUNCH
LOOP
TRIGGER
SCRUB
METER/	TRACK VIEW
UNDO

121