Kyocera FS-1010 service manual Removing the separators

(1) Removing the separators

WARNING The separation claws are extremely hot immediately after the printer was running. Allow substantial period of time until it cools down.

1.Remove and split the fuser unit (See page 5-20).

2.Loosen the stopper screws 1.

3.Hold the separators 2 upright, and remove the separators 2 and separator springs 3.

Step 1

1

Step 2

2

2

3

Figure 5-2-21 Removing the separators

FS-1010

5-22