Kyocera FS-1010 service manual Handling Dimm

(3) Notes on handling DIMM

Before proceeding to install DIMM, read the following notes for handling the main board and DIMMs:

•Protect the electronics by taking these precautions:

•Before touching a DIMM, touch a water pipe or other large metal object to discharge yourself of static electricity. While doing the work, it is recommended that you wear an antistatic wrist strap.

•Touch the main board and DIMM only by the edges, not in the middle.

Figure 2-2-6 Handling DIMM

FS-1010

2-9