Kyocera FS-1010 service manual Status, Printing the service status, Go key

Status page

The printer can print different types of the status page—the user (normal) status page and the service status page. This section exclusively describes information obtainable with the service status page. For information on the user (normal) status page, refer to the printer’s User’s Manual.

Information on the service page include various settings for the printer, service statistics, etc. To print a service status page, proceed as follows:

Printing the service status page

To print a service status page, using the Go key on the operator panel. Or, have a PC running MS- DOS and proceed as follows:

Go key

[Prints a user status page]

Press the Go key for 3 seconds or more and less than 10 seconds.

[Prints a service status page]

Press the Go key for 10 seconds or more.

PC

1Connect the printer to the PC via the parallel interface.

2Ensure that the printer is ready to print.

3At the DOS prompt, type:

echo !R! STAT 1; EXIT; >lpt1:

The service status page is printed. (If you omit ‘1,’ a user status page is printed.)

FS-1010

B-3