![](/images/new-backgrounds/1185436/18543659x1.webp)
7.Push the lock lever #1 1 to the lock position.
8.Close the top cover 4.
1
LOCK
UNLOCK
4
K
C
O
L
K
C
O
L
N
U
| Figure- |
NOTE | The printer is shipped from the factory with no toner supplied in its developer |
| (Process unit). When the printer is first switched on after the toner container is |
| installed in the manner above, there will be a delay of several minutes before |
| the printer gets ready to print a job. |
| This delay is necessary for the printer to fill the developer reservoir with a |
| sufficient amount of toner to continuously support a print job. The period of |
| time is approximately 15 minutes. |
| If the toner low or replace toner indication does not go off after installing the |
| new toner container, take the toner container out once, shake it well, then |
| install again. |