Kyocera FS-1010 service manual Paper feeding system, Paper feeding path

4-2 Paper feeding system

The paper feeding system picks up paper from the cassette, MP tray, or if installed, the paper feeder PF-17, feeds it in the printer, and delivers in the output tray. Paper is fed at the precise timing in synchronization with data processing. The paper feeding system finally delivers the printed page to either the face-down or face-up tray as manipulated by the user.

The figure below shows the components in the paper feeding system and the paths through which the paper travels. The sensors, clutches, etc., are described in the following pages.

( * 3 5

4

9

&

^

2

1

4

6% $ # @ ! 0 8 7

1 Cassette	8 Feed pulley	% Press roller
2 MP tray	9 MP feed roller	^ Lower exit roller
3 Face-down output tray	0 Lower registration roller	& Exit pulley
4 Face-up output tray	! Upper registration roller	* Upper exit roller
5 Process unit	@ Transfer roller	( Exit pulley
6 Fuser unit	# Drum
7 Feed roller	$ Heat roller

Figure 4-2-1 Paper feeding path

FS-1010

4-15