Kyocera FS-1010 service manual Maintenance messages

Maintenance messages

Indicator	Remote Operation Panel display	Description
	Add paper <paper source>	The paper has run out. Add paper to the
		paper cassette (1 or 2) or MP tray.
		The paper source is displayed in the
		Remote Operation Panel utility.
		The paper cassette is not closed securely.
		Close the paper cassette properly.
	Close top cover	The top or front cover is open.
		Close the cover properly.

Load Cassette #	There is data for printing that matches
<paper size><paper type>	with a paper cassette setting (paper size,
	paper type), but there is no paper in the
	paper cassette.
	Set paper of the size and type specified
	in the print data into the cassette (1 or 2)
	to resume printing.
	When you want to feed from a other
	paper source, press the Go key to switch
	the paper source. The printer prints on
	the paper size and type set in that
	particular paper source.
Load MP tray	The cassette paper size and data paper
<paper size><paper type>	size are not the same.
	The printer feeds from the MP Tray
	when the page in the paper cassette is a
	different size and type than that
	specified in the print data. Set paper of
	the size and type specified in the print
	data into the MP tray, then press the Go
	key to resume printing.
	When you want to feed from a source
	other than the MP tray, make sure there
	is no paper in the MP tray, then press
	the Go key to switch the paper source.
	The printer prints on the paper size set
	in that particular paper source.
	Note: Feeding the paper having a paper size
	which does not match the current paper size
	from the MP tray can cause paper jam.

FS-1010

6-6