Kyocera FS-1010 service manual Removing the transfer roller

5-2-5 Removing the transfer roller

CAUTION Do not touch the transfer roller (sponge) surface. Oil and dust (particles of paper, etc.) on the transfer roller can significantly deteriorate the print quality (white spots, etc.).

When refitting the bushes and springs, make sure to refit the black colored bush and spring on the left side. Also, observe the correct direction to which the bush is fit in reference to the paper passing direction.

1.Remove the process unit. (See page 5-4)

2.Remove the transfer roller 1 from the both bushes.

Paper passing direction

LongShort

Gear

Transfer roller

Bush

Bush

(Black colored)

Spring

(Black colored)

11

Bush

Spring

Figure 5-2-9 Removing the transfer roller

FS-1010

5-10