4: Network Settings

Using XML

Not applicable.

 

Table 4-8 WLAN Quick Connect

 

 

WLAN Quick Connect

Description

Settings

 

Network Name (search field)

Enter a network name and click Scan to search for a network.

 

 

Scan “<network SSID>”

Perform a scan for devices within range of the xPico Wi-Fi. Including the

 

optional network SSID limits the scan to devices configured with the

 

specified network SSID. Omitting the network SSID performs a scan for all

 

devices in range.

 

 

Network Name (link)

Lists the SSID of a network. Click a specific Network Name to display the

 

Quick Connect profile. If you provide the Password for a specific Quick

 

Connect Profile, you can add that profile to your list of WLAN Profiles. Up

 

to four WLAN profiles may be added, and only one may be connected at

 

any given time.

 

 

BSSID

Lists the basic service set identifier. This is a unique 48-bits address that

 

identifies the access point that creates the wireless network.

 

 

CH

Provides the channel number of a network.

 

 

RSSI

Displays an instantaneous value indicating the signal strength of the

 

network. The best to worst signal strength is indicated by green, yellow and

 

red respectively.

 

Note: RSSI reported in scan results is a single sampling.

 

 

Security Suite

Lists the security suite of a network (e.g., WEP, WPA, WPA2).

 

 

xPico® Wi-Fi® Embedded Device Server User Guide

29

Page 29
Image 29
Lantronix 900-691-R Wlan Quick Connect Description Settings, Scan network Ssid, Network Name link, Security Suite