2: Introduction
xPico® Wi-Fi® Embedded Device Server User Guide 14
-CLI (Serial Monitor Port)
-XML Configuration Import and Export (XCR, XML Status Export [XSR])
-WebAPI
-Field upgradable firmware (OTA)
-Power Management Framework
-OEM Support Kit
-Simple Customization and device configuration management
Security:
-256-bit AES encryption
Architecture:
-ARM Cortex-M3 class processor with on-chip Flash and SRAM
-1 MB Flash and 128KB SRAM
-SPI Flash 1 MB
-Zero Host Load Driver
Physical Interface: 40-pin Board-to-Board SMT Connector
Certifications: FCC, IC, EU, Japan, UL, CE
Warranty: 5-Year Limited
Protocol Support
The xPico Wi-Fi embedded device server contains a full-featured IP stack. Supported protocols
include:
IEEE 802.11 b/g and IEEE 802.11n (single stream) WLAN interface (2.4 GHz only)
802.11i - WPA-Personal, WPA2-Personal
Soft-AP with DHCP Server
HTTP Server
TCP/IP, UDP/IP, DHCP Server (Software enabled Access Point interface), ARP, ICMP, DHCP
Client (WLAN interface), Auto-IP, DNS
Troubleshooting Capabilities
The xPico Wi-Fi device offers the abilty to view Trouble Log messages (see Line Settings on page
30).