Appendix A: Command Reference

configitem Name

value

The Name is for display purposes only.

Name may contain up to 25 characters.

configitem State

value

Enable the State to allow the Serial Line to operate.

State may be "Enabled" or "Disabled".

configitem Protocol

value

Protocol selects the application to connect to the Line: None selects no application to connect to the Line.

Tunnel sets up the Line to work with the Tunnel application. See the Tunnel configuration options for details.

Trouble Log sets up an output-only message log on the device. Severity codes in the log are:

PEmergency A Alert

C Critical E Error W Warning N Notice

I Informational D Debug

Command Line sets up a user interface containing commands to show device status and to change configuration. Simply paste in XML configuration to apply its settings to the device.

Protocol may be "Command Line", "Modem Emulation", "Monitor", "None", "Trouble Log" or "Tunnel".

configitem Baud Rate

value

When specifying a Custom baud rate in the Web Manager, select 'Custom' from the drop down list and then enter the desired rate in the text box.

Baud Rate has units of bits per second.

configitem Parity

value

Parity may be "None", "Even" or "Odd".

configitem Data Bits

value

Data Bits may be "7" or "8".

xPico® Wi-Fi® Embedded Device Server User Guide

81

Page 81
Image 81
Lantronix 900-691-R Configitem Name, Configitem Protocol, Configitem Baud Rate, Configitem Parity, Configitem Data Bits