Installing a Lower Feeder Unit (LFU) 131
Installation
Attention
If cons um ables are instal l ed in the printe r, be sure to keep th e pri nt er le v el wh en
moving it to prevent accidental spills.
If your printer is located in its permanent location, follow this procedure. Otherwise, skip
to step 3.
1Pull out the two carrying bars on the right side
of the printer.
WARNING!
The printer weighs about 87.1 lb (39.5 kg) wit hout accessor ie s or consumables in stalled, an d
133.7 lb (60.6 kg) with accessories and consumables installed. Always have two people to lift
and move the printer to avoi d back injury. Addit ion al assistanc e may be requ ired if lifti ng
the printer above waist-level.
2With one person holding the carrying bars and another holding the two grips on the
left side of the printer, lift the prin ter and temporarily move it to a flat, level sur face.
3Remove the lower feeder unit from the ship ping carton, and plac e it where the
printer will be located.
4Slide out the optional media tray from lower feeder unit.