BuzzBox150

5Use the adhesive-backed clips provided to mount the BuzzBox where the printer
operator can see and/or hear it.
A 14-foot (4.2 m) cable is provided, but you can use up to a 500-foot cable (RJ-11
4-pin or 6-pin).
6Connect the interface b o x to an elect ri ca l ou tlet.
A 110/220-volt adaptor is provided in the US, and a universal power supply is pro-
vided outside the US.
7If you unplugged a pa rallel cable from the printer in step 1, attach the cable to the
para llel por t on th e interface box.
8To test the BuzzBox, make sure its switches are on, then press the printe r’s Online
key to take the printer off line.
You can use the BuzzBox switches to enable or disable the buzzer, the light, or both.
When the printer goes off line, the light flashes and the buzzer sounds until the
printer is placed back on line or until the light and buzzer switches are turne d off.
Usi n g Buz zB ox
When the BuzzBox lights or buzzes, check the printer message window to find out
what has interrupted printing. See “Status and Error Messages” on page 122 for a list
of printer messages and how to respond to the m.
Remember that pressing the Online key to enter the printer configuration menu trig-
gers the Bu z zBo x alarm.