Updating System Software86

2Change to the directory where the system file is located.
For example, assume the file is located on magicolor 2200 DeskLaser CD-ROM
under the directory "loadc ode" and that the drive le tter for the CD-ROM is E. To
change to the directory where the file is located you would use the following
sequence of commands.
C:\Windows\Desktop> e:↵
E:> cd loadcode↵
3At a command prompt, type
ftp
ipaddress
↵(for example, ftp 161.33.128.5↵)
4When prompted for a user name and password, press Enter for both.
An ftp
>
prompt displays.
If a message displays deno ting invalid passw or d, contac t your system administr ator.
Otherwise, continue.
5At the ftp> prompt, change to binary mode by typing
bin↵
WARNING!
Interrupting the download process may corrupt your pri nter’s operating system. Do not
attempt to stop the download or u se the printer’s control panel after t he download process is
started. After the file download, allow the printer to automatic ally reboot on its own to
complete the process. Do not manually reboot th e pri nt er.