Replacing the Fuser Oil Roller24
10 Check the status message in the message window.
If a transfer roller alert message is displayed, use the Service/Clear care menu to
remov e it.
Replacing the Fuser Oil Roller
The fuser oil roller provides a lubricant for the printer via an oil-impregnated roller. This
oil is ne cessar y for the proper functioning of the printer.
WARNING!
The fuser unit is hot. When the top cover is opened, the fuser unit temperature
drops gradually (one hour wait time). Do not re pl ace the fuser oil rolle r until you
are sure that the fus er un it has cooled down .
When the fuser oil roller is worn out, the message “REPLACE OIL ROLLER” appears
and the printer does not print. Replace the fuser oil roller.
1Turn off the printe r.
2Open the printer’s top cover.
3Rotate t he two fuser oil r oller lock levers to
relea s e the fus er o il roller.
Dispose of it prope rly according to your local
regulations.
4Remove the new fuser oil roller fr om its
shipping box.
Attention
If you set the new fuser oil roller on a tab le, do it as shown in
the illustration. Do not allow the roller surface to contact the
table or get dirty. This could lower image quality.