32-bit SuperDriver Setup68
1Select the watermar k you want to edit from the Watermark list.
When you select a watermark, it display s in the water mark graphic, and the water-
mark configuration detail s appear in the Watermark Edit fields located on the right
side of the window.
2Make changes to the settings in eac h option as needed.
See “Configuring Watermark Edit Options” on page 69 for a description of
Watermark Edit options.
3Choose OK to save your changes and close the W atermark window or choose Cancel
to disregard your changes.
If you choose another water mark from the list be fore sele cting the OK button, any
changes that were entered for the initial watermark selected will be lost.
Adding a New Watermark
1Choose the Add button.
When the Add button is selected the Watermark Edit fields will be fil led by default
values. You may choose to accept or change any of the default option values.
2Modify the settings fo r each Watermark Edit option as needed.
See “Configuring Watermark Edit Options” on page 69 for a description of
Watermark Edit options.
3Choose OK to save your changes and close the W atermark window or choose Cancel
to disregard your changes.
Deleting a Watermark
1Select the watermar k that you want to remove from the Watermark list.
2Choose Delete.
The selected watermark disappears from the Watermark list.
3Repeat steps 1 and 2 for each watermark that you want to remove.
4Choose OK to save your changes and close the W atermark window or choose Cancel
to disregard your changes.