Replacing the Fuser Unit and Transfer Roller Kit18
4Remove the fuser oil
roller.
Hold it by the green
handle only.
5Plac e the fu ser o il ro ller
on a level surface.
Attention
Since the fuser oil roller removed here is to be installed in the new fuser unit,
han dl e it with ca re. If you set the fuser o il rolle r on the ta bl e, do it as sho wn i n
the illustration. Do not allow the roller surface to c ontact the table or get dirty.
This could lower image q uality.
6Turn the release levers to release the fuser unit .