Replacing the OPC Drum, Laser Lens Cover, and Waste Toner Pack16
6Turn the left rel eas e lever o f the tran sfer belt
clockwise to its correct position (2 o’clock).
This lowers the transfe r belt.
Also make sure the transfer belt right release
lever is set to its correct position (10 o’c lock).
Attention
If the transfer belt left release le ver is at its top position (12 o’cl ock), the waste
toner pack cannot be installed.
Installin g the New Waste Toner Pack
1Remove the new waste toner pack from the drum kit box.
2Insert t he bott om of the waste toner pack into
its install ation posit ion in the printer.
3Insert the top of the waste tone r pack
into its inst all ation posit ion in the printer until it
is firm ly se ated .
4Close the printer’s front cover.
If the waste toner pack is not correctly installed
or the transfer belt right release lever is at its
top position (12 o’cloc k), the front cover cannot
be closed.
5Turn on the printer.
6Check the status message in the m essage window.
If an OPC drum or waste toner alert message is display ed, use the Servic e/Clear
care menu to remove it.