Repacking the Printer170
8Remove the 5-bin mailbox (if attache d).
9Remove the lower input feeder (if attached).
10 Repack the printer for shipment.
Attention
To avoid toner contamination during shipment , the printe r should be r e packed
without the fu ser oil r oller, to ner cartr idges, waste toner pack, OPC drum
cart ri dge, or trans fer be lt installed.
Remove the Cables
1Turn off the prin ter.
2Remove the power cabl e and all interface cables.
Remove the Fuser Oil Roller
WARNING!
The fuser unit can become extremely hot and cause severe burns. Make sure the
unit is cool before handling it.
1Open the printer’s top cover.
2Rotate the two lock levers to release the fuser oil roller.
3Remove the fuser oil roller.
4Store the fuser oil roll er in its original shipping bag.
5Close the printer’s top cover.
Remove the Toner Cartridge s
1Open the printe r ’s front cover.
2Remove the four toner cartridges and store them in their original packaging.