Loading Media40

Loading Media

Take off the top and bottom sheets of a ream of paper.
Holding a stack of approximately 250 sheets at a time,
fan the stack to prevent static buildup for the paper
before inserting it in a tray.
Attention
Always load the media short edge first.
Attention
Do not mix media of different sizes, types, or weights, as this will cause
printer jamming.
When refilling media, fir st remove any media remaining in the tray. Stack it with the
new media, ev en the edges, then reloa d it. Although the magicolor 2200 DeskLaser
was designed for printing on a wide range of media types, it is not intended to print
exclusively on a single media type except pla in paper. Continuous printing on media
other than plain pa per (such as envelopes, labels, thick stock, or transparencies) may
adversely affect pri nt quality or reduce engine life.
For media other than standard plain paper or transparencies, both the driver (Paper
tab, Paper Type opti on) and the MP Size key on the contr ol panel need to be sel ected.
It is important to use the MP Size key to set the multipurpose tray to the appro priate
media size in order to obtain optimum printing re sults.
Autoduplexing
Duplex (2-sided) printing can be done automatically with the optional duplex unit
installed.
Only up to 28 lb bond (105 g/m²) plai n paper can be duplexed.