
6.3 Positioning Documents on the Original Glass | 6 |
|
|
6.3Positioning Documents on the Original Glass
The procedure for positioning the document differs depending on the type of docu- ment being copied, therefore be sure the document is positioned correctly. For in- formation on using the duplexing document feeder, refer to “Feeding the Document Through the Duplexing Document Feeder” (page
When placing the document directly on the original glass, position it after lifting the original cover or the duplexing document feeder 15° or more, as shown below.
When loaded horizontally | When loaded vertically |
15 | 15 |
To position sheet documents
Follow the procedure described below when copying plain paper or documents that cannot be fed through the duplexing document feeder.
1 Lift open the original cover, or the duplexing document feeder if it is installed, and then position the document face down on the original glass.
Original Documents Chapter 6
Di2010/Di2510/Di3010/Di3510 |