Minolta Di3510, DI2510 Loading Documents for Specific Applications, Description of the Table

Original Documents Chapter 6

6 6.4 Loading Documents for Specific Applications

6.4Loading Documents for Specific Applications

The most appropriate document feed method and copy settings for specific appli- cations are described below.

For details on specifying the various copy settings, refer to “7 Specifying Copy Set- tings”.

Description of the Table
1	2	3	4	5	6	7	8
Single-Sided Document Ö
Single-Sided Copy
Desired Copy			Copy	Finishing	Margin	File	Binding
			Setting	Setting	Setting	Margin	Position
					(Orig. Ö	Setting
					Copy	(Auxiliary
					Screen)	Screen)

2	Single- Corner Staple —	—	—
	Sided

13

1.Shows whether the original document and the desired copy are single-sided or double-sided.

2.Shows how the copy will appear.

3.Shows how the document should be positioned. (page 6-4)

4.Shows the selected Copy setting. (Single-Sided, Double-Sided, 2in1 or 4in1) on the Orig. ÖCopy screen (page 7-18)

5.Shows the selected Finishing setting. (Corner Staple, 2-Point Staple or Hole Punch) (page 7-2)

6.Shows the selected Margin setting from the Orig. ÖCopy screen if a margin is specified for the document. (page 7-24)

7.Shows the selected File Margin setting from the Auxiliary screen if a binding margin is specified for the copy. (Advanced Operations volume)

8.Shows the stapling or hole-punching position that must be selected. (page 7-7 and page 7-9)

* A dash (—) indicates that no setting should be selected.

6-10 Di2010/Di2510/Di3010/Di3510