Minolta DI3010, DI2510, DI2010, Di3510 specs

8.4 When a Paper Misfeed Occurs

To clear a paper misfeed in the multiple bypass tray

1Pull out any misfed paper from the

multiple bypass tray.

2If the misfed paper cannot be pulled out, pull the lever for the sliding plate of the multiple bypass

tray, and then pull the sliding plate toward you.

3Press down on the sliding plate with your left hand and carefully

pull out any misfed paper.

4Return the multiple bypass tray to its original position.

8

Touch Panel Messages Chapter 8

Di2010/Di2510/Di3010/Di3510

8-19

Image 178

Minolta DI3010 To clear a paper misfeed in the multiple bypass tray, Pull out any misfed paper from Multiple bypass tray

Contents

Di2010/Di2510/Di3010/Di3510 Contents Turning the Copier On and Off Using the Touch PanelStopping Copying Loading Paper Paper SpecificationsSelecting the Paper Setting Feeding the Document Large Documents Specifying a Zoom SettingSpecifying a Copy Density When a Paper Misfeed Occurs When the Message Ready to copy Please add toner AppearsWhen the Message Stapler empty. Appears When the Message Cannot Staple. Appears Advanced Operations Introduction Introduction Indicate subsequent steps of a sequence Explanation of Manual ConventionsExplanation of Manual Conventions Actions Use of words and symbols in this manual are explained below Explanation of Basic Concepts and SymbolsDicated by either C or Explanation of Basic Concepts and Symbols Components and Their Functions Components and Their Functions 1312 Network Interface Card NC-4 Part Names and Their Functions Part Names and Their Functions Part Names and Their Functions Introduction Chapter Duplexing Document Feeder Paper Feed Cabinet PF-124/PF-210 Part Names and Their Functions Built in Finisher FN-117 Mail Bin Kit MK-1 Additional Bin Kit AK-1 Large Capacity Cabinet PF-122Saddle Kit SK-1 Available 2 Features Useful Operations Copying a Book or Magazine Touch Separation. Next, touch Enter Useful OperationsBook or RightBound, and then Touch Page Order Right appears, turn Repeat , and when the lastAfter the message shown at Book or magazine, re-position Copying to Form a Booklet Touch 4in1/Booklet Pages in half to form a booklet Touch Booklet Creation, and thenTouch Enter Tip Automatically Stapling Pages While Copying Touch Sort Printing Multiple Copies of Tickets Maximum of 50 sheets of thick paper can be loaded Open the multiple bypass trayLoad it with paper Touch Paper Image Repeat Touch Auxiliary, and then touchTouch Size Input Available Features Chapter Copying While Erasing an Area Around the Document Edge/Frame Erase Example Erasing a frame Touch Select the desired positionErased area Width of the erased area Reducing Paper Usage Original Document Copy Touch Double-2in1 Reducing Electricity Usage Touch 3/6 Current value, and then use Copier enters Sleep modePress the C key to erase Desired length of time until Useful Operations Touch Enter Useful Operations Before Making Copies Names of Control Panel Parts and Their Functions Names of Control Panel Parts and Their Functions To check the settings Checking the SettingsTo change the settings To change the screen display setting Screen Mode function User Accessibility OperationsUser Accessibility Operations Touch Enter Di2010/Di2510/Di3010/Di3510 To change the key settings Key Speed Settings function Chapter Before Making Copies Chapter Enlarging the Touch Panel Screens Enlarging the Touch Panel Screens Turning the Copier On and Off To turn on the copier Turning the Copier On and Off When the copier is turned onWhen the copier is turned off To turn off the copier Auto Panel Reset Energy Save Mode Sleep Mode Adjusting the Angle of the Control PanelAdjusting the Angle of the Control Panel ➁ Middle position ➂ Lower position Default Settings Using the Touch PanelDescription of the Touch Panel Operating the Touch Panel Using the Touch PanelBe careful not to damage the touch panel Description of the Screens Job List Screen To check the status of a job Touch Job List Select the job whose status you wish to check To check the printing order To check/delete listed items from the Print screen After copying is finished, touch Job List To use the memory recall featureMemory Recall Touch Memory Recall Waiting Press the Start key. The copies are printed Basic Copy 4 Operations Making Basic Copies Tip Stopping Copying Follow the procedure described below to cancel a copy jobTo stop/restart/delete a copy job Interrupting a Copy Job Interrupting a Copy JobTo interrupt copying Using the Copy Track Mode Parameter Making Copies Using AccountsTo make copies when accounts are specified Basic Copy Operations Chapter Making Copies Using Accounts Copy Paper Paper Types Paper SpecificationsUse paper that meets the following specifications Available Non-standard-sized paper Paper SpecificationsPaper Sizes Not available Standard-sized paper Paper Capacity Not available Unsuitable Paper Unsuitable Paper Print Area Print Area Paper Storage Paper Storage Operating conditions Automatically Selecting the Paper SourceOrder for Selecting Another Paper Drawer Loading Paper Loading Paper Loading Paper Into the 1st/2nd/3rd/4th Paper Drawer Mylar Loading Paper Into the Large Capacity Cabinet Loading Paper Into the Multiple Bypass Tray To load plain paper Paper guides To load postcards To load envelopes To load overhead projector transparencies When loading overhead projectorTo load label sheets PaperCopy Copy Paper Chapter To store a non-standard custom paper size Touch Enter This completes the storing of custom paper sizes Copy Paper To select a stored non-standard custom paper size Loading Paper Press the Start key. The copies are printed To select paper loaded into a paper drawer Selecting the Paper SettingTo select paper loaded into the multiple bypass tray Original 6 Documents Feeding the Document Using the Duplexing Document FeederDocuments of Mixed Original Detection mode Document Types Mixed Width Document Sizes Precautions Concerning the DocumentsFeeding the Document Copying possible Copying not possible Adjust the document guides to the size of the document Loading the Document Original Documents Chapter Original Documents Chapter Positioning Documents on the Original Glass Positioning Documents on the Original GlassTo position sheet documents Position the document so that it To position transparent or translucent documents To position books or magazines Loading Documents for Specific Applications Description of the Table Loading Documents for Specific Applications Single-Sided Documents Original Documents Chapter Single-Sided Document ÖSingle-Sided Copy Double Corner Staple Sided Hole Punch Point Staple Original Documents Chapter Original Documents Chapter Left-Bound Double-Sided Documents Original Documents Chapter Left-Bound Double-Sided Document ÖSingle-Sided Copy Original Documents Chapter Original Documents Chapter Original Documents Chapter Top-Bound Double-Sided Documents Original Documents Chapter Top-Bound Double-Sided Document ÖSingle-Sided Copy Double Corner Staple Sided Hole Punch Point Staple Original Documents Chapter Original Documents Chapter Large Documents Precautions for 11 ⋅ 17 L/Legal L CopiesLarge Documents Original Documents Chapter Specifying 7 Copy Settings Specifying Finishing Settings Available Finishing Settings Di2010/Di2510/Di3010/Di3510 Specifying Copy Settings Chapter Tip Crisscross Sorting Shift SortingEach copy set is fed out shifted to alternating sides Shift Grouping To make copies using a stapling setting Specifying Finishing SettingsCrisscross Grouping Specifying Copy Settings Chapter To make copies using the Hole Punch setting Creasing and Folding Paper size 11 ⋅ 17 L When the 2-Point Staple setting is selected Maximum number of sets Number of bound pages Specifying a Zoom Setting Specifying Copy Settings Chapter To store Custom Zoom and Minimal zoom ratios To recall a stored custom zoom ratio Specifying a Zoom Setting Selecting the Orig. Copy Settings Orig. ÖCopy Settings Selecting the Orig. Copy Settings Single-Sided ÖSingle-4in1 Double-Sided ÖDouble-4in1 Single-Sided ÖBooklet Creation Book Spreadsheet ÖSingle-Sid To specify Orig. ÖCopy settings Specifying Copy Settings Chapter Specifying Copy Settings Chapter Copying a Bound Document Specifying Copy Settings Chapter Copy Copying a Book Select the desired Book Erase setting Frame-erasing Center-erasing Center- & frame-erasing Touch Enter Select the desired copy settings Press the Start key Copies are printed Copying Book Pages onto Separate Double-Sided Pages Press the Start key. The copies are printed Quickly Selecting Default Settings Specifying Copy Settings Chapter Specifying Copy Settings Chapter Specifying a Copy Density Di2010/Di2510/Di3010/Di3510 Touch Panel 8 Messages When the Message Ready to copy Please add ton- er. Appears When the Message Please add toner. Appears When the Message Please add toner. AppearsTo replace the toner bottle When the Message Please add toner. Appears Touch Panel Messages Tip To replace the staple cartridge for finisher When the Message Stapler empty. AppearsWhen the Message Stapler empty. Appears Open the front door Di2010/Di2510/Di3010/Di3510 When the Message Stapler empty. Appears Touch Panel Messages Chapter To replace the staple cartridge for the saddle kit Be careful when installing the staple cartridge holder Touch Panel Messages Chapter When a Paper Misfeed Occurs When a Paper Misfeed OccursLocations of Paper Misfeeds To clear a paper misfeed in the duplexing document feeder Touch Panel Messages Chapter Image transfer roller When a Paper Misfeed Occurs Carefully pull out any misfed To clear a paper misfeed in the duplex unit To clear a paper misfeed in the multiple bypass tray Pull out any misfed paper from Multiple bypass tray To clear a paper misfeed in the 1st or 2nd paper drawer To clear a paper misfeed in the 3rd or 4th paper drawer To clear a paper misfeed in the large capacity cabinet To clear a paper misfeed in the built in finisher Touch Panel Messages Chapter Touch Panel Messages Chapter To clear a paper misfeed in the mail bin kit Touch Panel Messages Chapter To clear a paper misfeed in the saddle kit Touch Panel Messages Chapter To clear jammed staples When the Message Cannot Staple. AppearsRemove all paper from Finisher Touch Panel Messages Chapter Touch Panel Messages Chapter Touch Panel Messages Chapter Touch Panel Messages Chapter When the Message Hole Punch collection box is full. Appears When the Message Hole Punch collection box is full. Appears MessagesPanelTouch Troubleshoot- 9 ing Main Messages and Their Remedies Add toner. Appears → When Incorrect Copies Are Printed When Incorrect Copies Are Printed When Incorrect Copies Are Printed Copy was reduced to a size Select a zoom ratio that adjusts When the Copier Is Not Operating Correctly Index Index Di2010/Di2510/Di3010/Di3510 10-3 Large capacity cabinet 1-14 Mail bin Paper misfeed Misfeed-clearing doorOutput tray cover Overhead projector transparencies 5-15 Paper misfeeds Portrait Positioning documents Print indicatorPaper stopper 1-12 Replacing the staple cartridge Index Switchback unit Touch panel Di2010/Di2510/Di3010/Di3510 10-7 10-8 Di2010/Di2510/Di3010/Di3510 Copyright