6.3 Positioning Documents on the Original Glass

6

 

 

To position books or magazines

Follow the procedure described below when copying bound documents, such as books and magazines.

1In the Basics screen, touch [Orig. ÖCopy], and touch [Back]. Then, make other settings.

2Lift open the original cover, or the duplexing document feeder if it is installed.

3Position the document face down on the original glass, with the top of the book toward the rear of the copier and with the center of the book aligned with the book mark in the document scale.

4Carefully close the original cover, or the duplexing document feeder if it is installed.

Note

For thick documents, make the copy without closing the original cover or du- plexing document feeder.

While the document is being scanned with the original cover or duplexing document feeder open, do not look directly at the bright light that may shine through the original glass.

If the document is not positioned correctly, the copies will not be printed in the correct sequence.

Lift open the original cover, or the duplexing document feeder if it is installed, 15° or more.

Do not place objects exceeding 6-1/2 lbs. on the original glass.

If a book is placed on the original glass, do not press it down with extreme force, otherwise the original glass may be damaged.

Tip

For details, refer to “Copying a Book” on page 7-27.

Original Documents Chapter 6

Di2010/Di2510/Di3010/Di3510

6-9

Page 102
Image 102
Minolta DI3010, DI2510, DI2010, Di3510 user manual To position books or magazines, Tip