4 Touch and press the [C] key.
Then, touch and to select the length of side X for the paper that is loaded.
❍ Touch so that the cursor moves below the digit that you wish to change.
To set a non-standard (custom) paper size
If non-standard-sized paper is loaded, it will be necessary to enter the paper size.
Two non-standard paper sizes can be stored for easy selection. For details, refer to the next section.
Note
Where you do not wish to set the custom size, press the [Panel Reset] key, or exceed the auto panel reset time, and this will reset to the default settings.
5
5.6 Loading Paper
1Touch [Paper].
2Touch the button for the multiple bypass tray, and then touch [Mode Change].
5Chapter 3 Touch [Custom Size].
The Custom Size screen appears.
