4.3 Interrupting a Copy Job
4.3Interrupting a Copy Job
4
The current copy job can be paused so that a copy of a different document can be made.
This is convenient if you wish to quickly make copies of a short document while a large job is being printed.
Note
If certain functions are specified, it may not be possible to interrupt the copy job. In addition, some functions are not available while a copy job is interrupted.
The copier will not enter Interrupt mode (pause copying by pressing the [Inter- rupt] key) while a document is being scanned.
For details, refer to the “Function Combination Table” of “Appendix” in the Ad- vanced Operations volume of the User Manual.
To interrupt copying
1Press the [Interrupt] key while a
job is being printed.
❍The indicator on the [Interrupt] key lights up.
❍The message “Now in the interrupt mode.” appears.
❍The copy settings return to their defaults.
(The copy settings of the job before the interruption and the remaining number of copies are recorded.)
❍If no operation is performed for one minute after the [Interrupt] key is pressed, the Interrupt mode is automatically cancelled.
2Position the document(s) to be copied.
3Select the desired copy settings.
4Press the [Start] key.
❍ Scanning of the document begins.
5When the interrupt mode copy has completed, press the [Interrupt] key.
The indicator on the [Interrupt] key goes off and the Interrupt mode is cancelled. The copy settings for the job before copying was interrupted appear, and copying of the job that was interrupted automatically continues.
Basic Copy Operations Chapter 4
Di2010/Di2510/Di3010/Di3510 |
